Environmental protection

In everything it does, TDK Electronics is fully aware of its responsibility toward future generations. Going beyond mere compliance with and the implementation of all relevant requirements, our goal is to constantly improve the company’s energy efficiency and continually reduce our consumption of resources. In 1998, we introduced an ISO 14001-compliant environmental management system across all our facilities worldwide. External institutions monitor our strict compliance with all relevant requirements. The energy management systems at our European facilities are also accredited in accordance with ISO 50001.

Worldwide, we already generate more than two thirds of the energy we use from renewable sources. We avoid hazardous substances and reduce waste to a minimum. TDK Electronics also places strong emphasis on the environmentally compatible disposal of wastewater.

Environmental, Energy and Occupational Health and Safety Policy

The Environmental, Energy and Occupational Health and Safety policy of TDK Electronics contributes to protect and grow a safe and environmentally responsible business in a way that helps earn the respect of society.

Packaging Directive

As a responsible industrial company, we would like to inform you about the possibility of returning packaging of the same type, shape and size as the packaging we put on the market that is not subject to system participation at the place of actual handover or in its immediate vicinity.

Environmentally conscious product design

The environment is also an increasingly important consideration in the design of our products. It is something we are committed to as a company and something our customers are increasingly concerned about. We carefully consider the materials we use and how we design our products to be as environmentally friendly as possible. For example, we have developed capacitors with certified eco-foil and inductors that consist of almost half of recycled material.

Inductors made from recycled material

Our CLT32 inductors for automated driving consist of more than 40 percent recycled raw materials. They contain no silver and significantly less nickel. They also take up very little board space. The inductors replace several other components and have lower losses and longer service life.

Further benefits and specifications

Environmentally friendly SMD design

Our PTC-ICL thermistors in SMD design are used in on-board chargers for electric and hybrid vehicles (xEV). They protect the DC link capacitors from excessive inrush currents and the system from short circuits. Thanks to the surface-mounted design, they are significantly smaller than wired or molded designs. This also means that the transport packaging is smaller, and shipping is more environmentally friendly. They can be mounted faster and more energy-efficiently at the client's production site.

Further benefits and specifications

Lead-free NTC chips

Our NTC chips feature an innovative electrode design: The bottom side is suitable for both soldering and silver pressure sintering, while the top side can be contacted by thick aluminum wire bonding. One of our products is also available in a lead-free version. These components are used for temperature control in power modules in wind turbines, in motor drives, in solar inverters, or the charging infrastructure for electric vehicles.

Further features and specifications

Capacitors with bio based film

Our ModCap power capacitors are available with certified bio-based film. Instead of fossil raw materials, this polypropylene is made from renewable resources, such as vegetable oil production or the pulp and paper industry. Capacitors with bio-based film have identical electrical and physical properties as products with conventional film.

Interview on the development and application of the bio-based film

Sustainability in our products

REACH

Registration, evaluation, authorization and restriction of chemicals in accordance with Regulation (EC) 1907/2006

RoHS II

Products that are suitable for use in devices in accordance with Article 2, 2011/65/EU, amended by Directive (EU) 2015/863

China RoHS II

Chinese legislation on the avoidance of environmental pollution through electrical equipment

Material data sheets

Record of the material composition of our components for typical representatives of our product families

BAD-SL

Information about banned and declarable substances in our products

Climate Protection

Production with green energy − how we contribute to climate protection

Biodiversity

The protection of biodiversity is anchored in the TDK Group's environmental policy as an important field of action.

Fact sheet Input/output analysis

Comparison 2022 to 2025		Fiscal Years
Typ	Unit	2023	2024	2025	2026
Energy consumption	MWh/a	1,210,881	980,900	949,493	1,042,727
CO₂ equivalents (Scope 1&2, GHG protocol)	t/a	103,881	73,754	58,974	34,377
Scope 1	t/a	36,910	30,070	24,572	22,632
Scope 2	t/a	66,971	43,685	34,402	11,745
Water withdrawal	m^3/a	4,013,893	3,378,866	2,769,670	2,821,014
Waste total	t/a	18,548	16,022	14,415	16,625
Non-hazardous waste	t/a	11,390	9,994	8,934	9,824
of which recycled	t/a	10,753	9,526	8,372	9,426
Hazardous waste	t/a	7,158	6,028	5,481	6,801
of which recycled	t/a	3,817	3,391	3,267	4,050
Chemicals	t/a	32,543	24,005	17,789	18,423
Metals (Products)	t/a	31,018	27,451	26,941	26,155
Plastics / synthetics (in products)	t/a	7,493	7,308	10,080	11,841

The TDK Electronics fiscal year goes from April 1 until March 31 of the following year.

Input raw materials and supplies

Input raw materials and supplies		Regions
Type	Unit	Europe	Americas	Asia	TDK Electronics total
Gases	t/a	8,369	229	9,750	18,348
Chemicals	t/a	7,590	467	10,366	18,423
Metals (in products)	t/a	16,427	1,636	8,093	26,155
Plastics / synthetics (in products)	t/a	2,038	2,092	7,667	11,841

Input energy

Input energy		Regions
Type	Unit	Europe	Americas	Asia	TDK Electronics total
Electrical energy	MWh / a	681,633	39,169	254,341	975,143
thereof self-generated electricity from renewable sources	MWh / a	5,942	0	29,249	35,191
Natural gas	MWh / a	52,631	0	9,032	61,663
LPG	MWh / a	201	1,000	3,235	4,436
Oil	MWh / a	717	40	233	990
Long distance heating	MWh / a	495	0	0	495
Total	MWh / a	735,677	40,209	266,841	1,042,727

CO₂ equivalents

CO₂ equivalents		Regions
resulting from	Unit	Europe	Americas	Asia	TDK Electronics total
Scope 1 (GHG protocol)
Natural gas	t CO₂ / a	14,192	0	2,511	16,703
LPG	t CO2 / a	31	155	501	687
Light oil	t CO₂ / a	180	13	74	267
others (from production activities)	t CO₂ / a	1,947	671	2,357	4,975
Scope 2 (GHG protocol)
Electrical energy	t CO₂ / a	0	0	11,694	11,694
Long distance heating	t CO₂ / a	51	0	0	51
Total	t CO₂ / a	16,401	839	17,137	34,377

Explore more

3,500 trees for a green and healthy environment

Almost 100 employees at the Batam site in Indonesia planted 3,500 trees in forests and coastal areas over three days.

Pb-free NTC thermistors

TDK Corporation announces the L862 NTC thermistors with bendable wires and the L871 lead spacing NTC thermistors that can be used in a wide range of automotive and industrial applications.

Iceland: Warmed cooling water heats residential area

In Iceland, warm cooling water from the production process at the Akureyri site is used to heat a residential area in the nearby town.

Interview: More Sustainable Film Capacitors

TDK has introduced a bio-circular polypropylene film for its ModCap series of DC-link capacitors.

Certificates

Our ISO, IATF, ISO/TS, TISAX and CSR Assessment Certificates