SMD Drive Transformers (B78541A),PSpice
History
History for SPICE-Library for PSPICE (Orcad)
for TDK Electronics AG : B78541A.lib
Version 1.00
assembled on (Thu Feb 15 16:39:07 CET 2024)
-----------------------------------------------------------------------
Version 1.00
- library created
- Component B78541A2467A003 added
-----------------------------------------------------------------------
Readme
SPICE-Library for PSPICE (Orcad)
for TDK Electronics AG : B78541A.lib
Version 1.00
assembled on (Thu Feb 15 16:39:07 CET 2024)
This SPICE library contains all models for
SMD Drive Transformers InsuGate series
These linear models are suited for DC, AC and Transient-
simulations. Accurate results can be expected below
the first resonant frequency. Using these models
outside its specification can lead to false results.
The models describe the behaviour of typical
elements. Please keep in mind, that real components
can vary in the range given in the datasheets.
Library listing of all parts
(sorted by part numbers) :
B78541A2467A003
Installation of B78541A Model Library
===============================================================
The model library of B78541A (SMD Drive Transformers InsuGate series) for the
circuit design program PSpice Schematics, version 6.1 and following
and Cadence ORCAD Capture comprises the following three files:
B78541A.LIB ASCII data file:
This file respresents the actual library and
contains the data required for simulation.
B78541A.SLB Symbol data file:
This file contains the terminal/graphics information
required by the graphic user interface "Schematics"
B78541A.OLB Symbol data file:
This file contains the terminal/graphics information
required by the graphic user interface "Orcad Capture"
To install the library you must copy the a.m. files into
a ORCAD working directory (e.g. \LIB or \UserLib)
PSpice Schematics:
The library files must then be activated under PSpice.
Proceed as follows to install the B78541A library:
1. Start PSpice
Install library file B78541A.LIB as permanent library
("ADD LIBRARY*") in submenu (version 9.1)
ANALYSIS -> LIBRARY AND INCLUDE FILES ...
BROWSE.. (choose B78541A.LIB)
.. ADD*
.. OK
ATTENTION: Add without asterisk ("*") is a local include
only for this actual simulation task.
2. Install symbol data file B78541A.SLB for the
"Schematics" graphic interface in submenu
OPTIONS -> EDITOR CONFIGURATION -> LIBRARY SETTINGS
BROWSE.. (choose B78541A.LIB) .. ADD* .. OK
Cadence ORCAD Capture:
The library files have to be included in ORCAD Capture
Proceed as follows to install the B78541A library:
1a. Use the delivered precompiled B78541A.OLB
or
1b. Start Cadence ORCAD Capture
Translate the library files B78541A.SLB
as ORCAD library (B78541A.OLB):
FILE -> Import Design -> PSpice -> Open ...
BROWSE.. (choose B78541A.SLB)
.. OK (version 10.5)
2. Adding the components to your project:
Open your project -> open a schematic
PLACE -> PART... -> Add Library...
(choose B78541A.OLB)
place component with OK.
3. Install the library B78541A.LIB for simulation:
PSPICE -> Edit Simulation Profile -> Configuration
Files -> Category Library
BROWSE.. (choose B78541A.LIB)
ADD as Global/to Design
OK