Loosely coupled PI (B82477C),PSpice
History
History for SPICE-Library for PSPICE (Orcad)
for TDK Electronics AG : B824XXC.lib
Version 1.01
assembled on (Wed Jan 25 15:33:51 CET 2023)
-----------------------------------------------------------------------
Version 1.10
B82477C4xxxM900 series 12.5 x 12.5 x 8.5 (mm) added
-----------------------------------------------------------------------
Version 1.00
- library created
B82477C6xxxM603 series 12.5 x 12.5 x 10.5 (mm) added
-----------------------------------------------------------------------
Readme
SPICE-Library for PSPICE (Orcad)
for TDK Electronics AG : B824XXC.lib
Version 1.01
assembled on (Wed Jan 25 15:33:51 CET 2023)
This SPICE library contains all models for
loosely coupled power inductors
These linear models are suited for DC, AC and Transient-
simulations. Accurate results can be expected below
the first resonant frequency. Using these models
outside its specification can lead to false results.
The models describe the behaviour of typical
elements. Please keep in mind, that real components
can vary in the range given in the datasheets.
Library listing of all parts
(sorted by part numbers) :
B82477C4103M900 Loosely coupled power inductor 12.5 x 12.5 x 8.5 (mm)
B82477C4153M900 Loosely coupled power inductor 12.5 x 12.5 x 8.5 (mm)
B82477C4202M900 Loosely coupled power inductor 12.5 x 12.5 x 8.5 (mm)
B82477C4223M900 Loosely coupled power inductor 12.5 x 12.5 x 8.5 (mm)
B82477C4302M900 Loosely coupled power inductor 12.5 x 12.5 x 8.5 (mm)
B82477C4333M900 Loosely coupled power inductor 12.5 x 12.5 x 8.5 (mm)
B82477C4472M900 Loosely coupled power inductor 12.5 x 12.5 x 8.5 (mm)
B82477C4473M900 Loosely coupled power inductor 12.5 x 12.5 x 8.5 (mm)
B82477C4682M900 Loosely coupled power inductor 12.5 x 12.5 x 8.5 (mm)
B82477C6103M603 Loosely coupled power inductor 12.5 x 12.5 x 10.5 (mm)
B82477C6153M603 Loosely coupled power inductor 12.5 x 12.5 x 10.5 (mm)
B82477C6223M603 Loosely coupled power inductor 12.5 x 12.5 x 10.5 (mm)
B82477C6333M603 Loosely coupled power inductor 12.5 x 12.5 x 10.5 (mm)
B82477C6472M603 Loosely coupled power inductor 12.5 x 12.5 x 10.5 (mm)
B82477C6473M603 Loosely coupled power inductor 12.5 x 12.5 x 10.5 (mm)
B82477C6682M603 Loosely coupled power inductor 12.5 x 12.5 x 10.5 (mm)
Installation of B824XXC Model Library
===============================================================
The model library of B824XXC (Loosely coupled power inductors) for the
circuit design program PSpice Schematics, version 6.1 and following
and Cadence ORCAD Capture comprises the following three files:
B824XXC.LIB ASCII data file:
This file respresents the actual library and
contains the data required for simulation.
B824XXC.SLB Symbol data file:
This file contains the terminal/graphics information
required by the graphic user interface "Schematics"
B824XXC.OLB Symbol data file:
This file contains the terminal/graphics information
required by the graphic user interface "Orcad Capture"
To install the library you must copy the a.m. files into
a ORCAD working directory (e.g. \LIB or \UserLib)
PSpice Schematics:
The library files must then be activated under PSpice.
Proceed as follows to install the B824XXC library:
1. Start PSpice
Install library file B824XXC.LIB as permanent library
("ADD LIBRARY*") in submenu (version 9.1)
ANALYSIS -> LIBRARY AND INCLUDE FILES ...
BROWSE.. (choose B824XXC.LIB)
.. ADD*
.. OK
ATTENTION: Add without asterisk ("*") is a local include
only for this actual simulation task.
2. Install symbol data file B824XXC.SLB for the
"Schematics" graphic interface in submenu
OPTIONS -> EDITOR CONFIGURATION -> LIBRARY SETTINGS
BROWSE.. (choose B824XXC.LIB) .. ADD* .. OK
Cadence ORCAD Capture:
The library files have to be included in ORCAD Capture
Proceed as follows to install the B824XXC library:
1a. Use the delivered precompiled B824XXC.OLB
or
1b. Start Cadence ORCAD Capture
Translate the library files B824XXC.SLB
as ORCAD library (B824XXC.OLB):
FILE -> Import Design -> PSpice -> Open ...
BROWSE.. (choose B824XXC.SLB)
.. OK (version 10.5)
2. Adding the components to your project:
Open your project -> open a schematic
PLACE -> PART... -> Add Library...
(choose B824XXC.OLB)
place component with OK.
3. Install the library B824XXC.LIB for simulation:
PSPICE -> Edit Simulation Profile -> Configuration
Files -> Category Library
BROWSE.. (choose B824XXC.LIB)
ADD as Global/to Design
OK