Loosely coupled PI (B82477C),ANSYS
History
History for SPICE-Library for ANSYS Designer
for TDK Electronics AG : B824XXC.lib
Version 1.01
assembled on (Wed Jan 25 15:33:53 CET 2023)
-----------------------------------------------------------------------
Version 1.10
B82477C4xxxM900 series 12.5 x 12.5 x 8.5 (mm) added
-----------------------------------------------------------------------
Version 1.00
- library created
B82477C6xxxM603 series 12.5 x 12.5 x 10.5 (mm) added
-----------------------------------------------------------------------
Readme
SPICE-Library for ANSYS Designer
for TDK Electronics AG : B824XXC.lib
Version 1.01
assembled on (Wed Jan 25 15:33:53 CET 2023)
This SPICE library contains all models for
loosely coupled power inductors
These linear models are suited for DC, AC and Transient-
simulations. Accurate results can be expected below
the first resonant frequency. Using these models
outside its specification can lead to false results.
The models describe the behaviour of typical
elements. Please keep in mind, that real components
can vary in the range given in the datasheets.
Library listing of all parts
(sorted by part numbers) :
B82477C4103M900 Loosely coupled power inductor 12.5 x 12.5 x 8.5 (mm)
B82477C4153M900 Loosely coupled power inductor 12.5 x 12.5 x 8.5 (mm)
B82477C4202M900 Loosely coupled power inductor 12.5 x 12.5 x 8.5 (mm)
B82477C4223M900 Loosely coupled power inductor 12.5 x 12.5 x 8.5 (mm)
B82477C4302M900 Loosely coupled power inductor 12.5 x 12.5 x 8.5 (mm)
B82477C4333M900 Loosely coupled power inductor 12.5 x 12.5 x 8.5 (mm)
B82477C4472M900 Loosely coupled power inductor 12.5 x 12.5 x 8.5 (mm)
B82477C4473M900 Loosely coupled power inductor 12.5 x 12.5 x 8.5 (mm)
B82477C4682M900 Loosely coupled power inductor 12.5 x 12.5 x 8.5 (mm)
B82477C6103M603 Loosely coupled power inductor 12.5 x 12.5 x 10.5 (mm)
B82477C6153M603 Loosely coupled power inductor 12.5 x 12.5 x 10.5 (mm)
B82477C6223M603 Loosely coupled power inductor 12.5 x 12.5 x 10.5 (mm)
B82477C6333M603 Loosely coupled power inductor 12.5 x 12.5 x 10.5 (mm)
B82477C6472M603 Loosely coupled power inductor 12.5 x 12.5 x 10.5 (mm)
B82477C6473M603 Loosely coupled power inductor 12.5 x 12.5 x 10.5 (mm)
B82477C6682M603 Loosely coupled power inductor 12.5 x 12.5 x 10.5 (mm)
Installation of B824XXC Model Library
===============================================================
The model library of B824XXC (Loosely coupled power inductors) for the
circuit design program ANSYS Electronics Desktop Circuit
Simulator comprises the following 5 files:
B824XXC.lib ASCII data file:
This file respresents the actual library and
contains the data required for simulation.
B824XXC_Nexxim.inc
ASCII data file:
This file respresents the actual library and
contains the data required for simulation with
Nexxim.
B824XXC.aclb Components file:
This file represents the terminal information
and data about the single Components of the
library
B824XXC.aflb Footprint data file:
This file contains the exact footprint for the
elements in the library
B824XXC.aslb Symbol data file:
This file contains the graphics information
required by the graphic user interface
To install the library you must extract the a.m. files into
the /userlib directory of your ANSYS Electronics Desktop
Installation. (They will be then situated in
/userlib/TDK/B824XXC. Don't use another directory!)
ANSYS Electronics Desktop:
1) Copy or extract the files in the a.m. directory
2) Start ANSYS Electronics Desktop
3a) Project -> Insert Circuit Design
4) Tools -> Configure Libraries
5) Mark: User Libraries
Components
Available Libraries: TDK-Folder
>>
6) Repeat for Footprints und Symbols
7) Check "Save as Default" and confirm with "OK"
8) The Elements are now prepared for use. Your find them in
the "Project Manager" -> "Components" -> "User Libraries"
Nexxim:
Tools -> Options -> General Options -> Component Chooser
Options -> check "Show all Components"
3b) Project -> Insert Nexxim Circuit Design
4) Tools -> Configure Libraries
5) Mark: User Libraries
Components
Available Libraries: TDK-Folder
>>
6) Repeat for Footprints und Symbols
7) Check "Save as Default" and confirm with "OK"
8) The Elements are now prepared for use. Your find them in
the "Project Manager" -> "Components" -> "User Libraries"