Power line triple chokes (B82745/46/47),Ansoft Designer/Nexxim
History
History for SPICE-Library for ANSYS Designer
for TDK Electronics AG : B8274X.lib
Version 0.20
assembled on (Thu May 28 10:51:27 CEST 2020)
-----------------------------------------------------------------------
Version 0.20
- component B82746S6623N030 added
-----------------------------------------------------------------------
Version 0.10
- library for component B82746S4103A020 created
-----------------------------------------------------------------------
Readme
SPICE-Library for ANSYS Designer
for TDK Electronics AG : B8274X.lib
Version 0.20
assembled on (Thu May 28 10:51:27 CEST 2020)
This SPICE library contains all models for
Current compensated power line ring core triple choke
These linear models are suited for DC, AC and Transient-
simulations. Accurate results can be expected below
the first resonant frequency. Using these models
outside its specification can lead to false results.
The models describe the behaviour of typical
elements. Please keep in mind, that real components
can vary in the range given in the datasheets.
Library listing of all parts
(sorted by part numbers) :
B82746S4103A020 Current compensated power line ring core triple chokes
B82748S6623N030 Current compensated power line ring core triple chokes
Installation of B8274X Model Library
===============================================================
The model library of B8274X (Current compensated power line ring core triple choke) for the
circuit design program Ansoft Designer comprises the
following 5 files:
B8274X.lib ASCII data file:
This file respresents the actual library and
contains the data required for simulation.
B8274X_Nexxim.inc
ASCII data file:
This file respresents the actual library and
contains the data required for simulation with
Nexxim.
B8274X.aclb Components file:
This file represents the terminal information
and data about the single Components of the
library
B8274X.aflb Footprint data file:
This file contains the exact footprint for the
elements in the library
B8274X.aslb Symbol data file:
This file contains the graphics information
required by the graphic user interface
To install the library you must extract the a.m. files into
the /userlib directory of your Ansoft Designer
Installation. (They will be then situated in
/userlib/TDK/B8274X. Don't use another directory!)
Ansoft Designer:
1) Copy or extract the files in the a.m. directory
2) Start Ansoft Designer
3a) Project -> Insert Circuit Design
4) Tools -> Configure Libraries
5) Mark: User Libraries
Components
Available Libraries: TDK-Folder
>>
6) Repeat for Footprints und Symbols
7) Check "Save as Default" and confirm with "OK"
8) The Elements are now prepared for use. Your find them in
the "Project Manager" -> "Components" -> "User Libraries"
Nexxim:
Tools -> Options -> General Options -> Component Chooser
Options -> check "Show all Components"
3b) Project -> Insert Nexxim Circuit Design
4) Tools -> Configure Libraries
5) Mark: User Libraries
Components
Available Libraries: TDK-Folder
>>
6) Repeat for Footprints und Symbols
7) Check "Save as Default" and confirm with "OK"
8) The Elements are now prepared for use. Your find them in
the "Project Manager" -> "Components" -> "User Libraries"