Press Releases

TDK Corporation presents two new series of leaded MLCCs, which are halogen-free according to IEC 61249-2-21 and expand the company’s lineup of products that offer minimal impact to the environment over the entire life cycle.

TDK Corporation presents a new multilayer low-pass filter for LTE and other next-generation high-speed wireless communication systems. The new filter with ordering code DEA071910LT-4003B1 achieves a miniaturized footprint of
0.65 mm x 0.5 mm and an insertion height of just 0.3 mm.

TDK Corporation has developed a new series of rugged power inductors for use in automotive electronics. The CLF6045NI-D wirewound SMD power inductors feature high efficiency and reliability over a very wide temperature range extending from -55 °C to +150 °C and offer rated inductance values from 1.0 μH to 470 μH (E6 series).

TDK Corporation presents a new generation of the EPCOS CeraLink™, a highly compact solution for the snubber and DC links of fast-switching converters based on SiC and GaN semiconductors.

TDK Corporation presents the new BCEM series of EPCOS high-current chokes designed specifically for buck-boost converters in 48-V automotive power systems. These innovative SMD inductors have very compact dimensions of only 27.5 mm x 29.5 mm x 14.5 mm thanks to their ERU27 ferrite cores with flat windings.

TDK Corporation has significantly extended its range of EPCOS snubber film capacitors: A total of 17 different terminal configurations are now available, enabling them to protect an even broader spectrum of IGBT modules against voltage peaks.

TDK Corporation has significantly extended its range of EPCOS snubber film capacitors: A total of 17 different terminal configurations are now available, enabling them to protect an even broader spectrum of IGBT modules against voltage peaks.

TDK Corporation presents a new series of ultra-compact EPCOS µDC-DC converters. One 6-MHz power switch is embedded in the miniature PCB. The integrated power module saves up to 35 percent space compared with conventional discrete solutions.

TDK Corporation presents two new EPCOS SMT current sense transformers for automotive electronics. The first type (B78417A2185A003) is based on an EP7 ferrite core and has dimensions of only 10.6 mm x 12.2 mm x 11 mm. The second SMT current sense transformer (B78419A2251A003) contains an EP10 ferrite core and measures 12.8 mm x 13.6 mm x 14.4 mm.

TDK Corporation has expanded its CGA series of automotive-grade MLCCs based on NP0 ceramics and now offers the industry’s broadest portfolio of NP0 products in terms of voltage range and capacitance range.

TDK Corporation presents three new series of EPCOS aluminum electrolytic capacitors with screw terminals. They are characterized by their high ripple current capability and simultaneously highly compact dimensions.

TDK Corporation presents a new series of EPCOS snap-in aluminum electrolytic capacitors. They are characterized by a ripple current capability that is up to 25 percent higher than for the types of the preceding EPCOS series.

TDK Corporation presents new EPCOS leaded RF chokes with high current capability. The series with designation LBC+ offers components for rated currents of up to 4450 mA at saturation currents of up to 7700 mA.

TDK Corporation presents the new EPCOS PQSine™ series of active harmonic filters that optimize power quality. The modular filter systems are designed for 3-phase networks with and without neutral conductors at voltages from 200 V AC to 480 V AC and 50/60 Hz.

TDK Corporation presents the third generation of EPCOS piezo actuators with copper internal electrodes, which offer both improved performance and higher cost-effectiveness. These innovative actuators are characterized by their outstanding stability and reliability.

TDK Corporation presents the new data book for EPCOS Ceramic Transient Voltage Suppressors (CTVS). It contains the extended product range of multilayer varistors (MLV), ESD/EMI filters, CeraDiode^® components as well as leaded transient voltage/RFI suppressors of the SHCV series.

TDK Corporation has developed a new series of 3-terminal feedthrough filters that are designed to meet the automotive industry’s demands for EMC components in emerging safety and infotainment applications.

TDK Corporation has expanded its technical support tools for MLCCs: The new DC Bias Model enables designers to simulate DC bias characteristics of MLCCs, even when the DC bias applied to the MLCCs varies.

TDK Corporation presents the new completely revised data book for EPCOS EMC filters 2014. It covers the comprehensive range of filter solutions for applications in industrial electronics, telecommunications and data technology.

TDK Corporation has extended its BR7000 series of EPCOS power factor controllers with two new types. The BR7000-I-TH controller offers 12 relay outputs for capacitor contactors and 12 transistor outputs for thyristor modules. The BR7000-I-TH/S485 features an additional RS485 bus interface that allows up to another 32 EPCOS TSM-LC-S thyristor modules to be controlled.