TDK Corporation has significantly extended its range of EPCOS snubber film capacitors: A total of 17 different terminal configurations are now available, enabling them to protect an even broader spectrum of IGBT modules against voltage peaks.
TDK Corporation presents a new series of ultra-compact EPCOS µDC-DC converters. One 6-MHz power switch is embedded in the miniature PCB. The integrated power module saves up to 35 percent space compared with conventional discrete solutions.
TDK Corporation presents two new EPCOS SMT current sense transformers for automotive electronics. The first type (B78417A2185A003) is based on an EP7 ferrite core and has dimensions of only 10.6 mm x 12.2 mm x 11 mm. The second SMT current sense transformer (B78419A2251A003) contains an EP10 ferrite core and measures 12.8 mm x 13.6 mm x 14.4 mm.
TDK Corporation has expanded its CGA series of automotive-grade MLCCs based on NP0 ceramics and now offers the industry’s broadest portfolio of NP0 products in terms of voltage range and capacitance range.
TDK Corporation presents three new series of EPCOS aluminum electrolytic capacitors with screw terminals. They are characterized by their high ripple current capability and simultaneously highly compact dimensions.
TDK Corporation presents a new series of EPCOS snap-in aluminum electrolytic capacitors. They are characterized by a ripple current capability that is up to 25 percent higher than for the types of the preceding EPCOS series.
TDK Corporation presents new EPCOS leaded RF chokes with high current capability. The series with designation LBC+ offers components for rated currents of up to 4450 mA at saturation currents of up to 7700 mA.
TDK Corporation presents the new EPCOS PQSine™ series of active harmonic filters that optimize power quality. The modular filter systems are designed for 3-phase networks with and without neutral conductors at voltages from 200 V AC to 480 V AC and 50/60 Hz.
TDK Corporation presents the third generation of EPCOS piezo actuators with copper internal electrodes, which offer both improved performance and higher cost-effectiveness. These innovative actuators are characterized by their outstanding stability and reliability.
TDK Corporation presents the new data book for EPCOS Ceramic Transient Voltage Suppressors (CTVS). It contains the extended product range of multilayer varistors (MLV), ESD/EMI filters, CeraDiode® components as well as leaded transient voltage/RFI suppressors of the SHCV series.
TDK Corporation has developed a new series of 3-terminal feedthrough filters that are designed to meet the automotive industry’s demands for EMC components in emerging safety and infotainment applications.
TDK Corporation has expanded its technical support tools for MLCCs: The new DC Bias Model enables designers to simulate DC bias characteristics of MLCCs, even when the DC bias applied to the MLCCs varies.
TDK Corporation presents the new completely revised data book for EPCOS EMC filters 2014. It covers the comprehensive range of filter solutions for applications in industrial electronics, telecommunications and data technology.
TDK Corporation has extended its BR7000 series of EPCOS power factor controllers with two new types. The BR7000-I-TH controller offers 12 relay outputs for capacitor contactors and 12 transistor outputs for thyristor modules. The BR7000-I-TH/S485 features an additional RS485 bus interface that allows up to another 32 EPCOS TSM-LC-S thyristor modules to be controlled.
TDK Corporation announces the launch of its new Product Center, a major new section of the global group website, which serves as the single point of access to all product-related information for all three product brands of the TDK Group: TDK, EPCOS and TDK-Lambda.
TDK Corporation presents the new EPCOS TSM-LC-S thyristor module for dynamic power factor correction (PFC). It is designed for voltages of 200 V AC to 440 V AC (50/60 Hz) and is suitable for compensating reactive powers of up to 55 kvar.
TDK Corporation presents a new series of soft-termination MLCCs that are specially designed to withstand flex cracking caused by bending stresses to the PCB.
TDK Corporation announces the development of the CCT series of clamp AC current sensors, whose two types are rated for up to 30 A and up to 100 A, respectively. They are thus suitable for power distribution panels in a variety of energy management systems.
TDK Corporation presents a new EPCOS ferrite disk that has been selected by Linear Technology Corporation for a wireless power receiver reference design with its LTC4120-based receiver.
We would be happy to keep you informed via e-mail. Please note that this service is for journalists only.