Leaded Inductors VHF (B82111E),PSPICE
History
History for SPICE-Library for PSPICE (Orcad)
for TDK Electronics AG : VHF.lib
Version 1.00
assembled on (Tue Jan 14 08:48:50 CET 2020)
-----------------------------------------------------------------------
Version 1.00
- library created
-----------------------------------------------------------------------
Readme
SPICE-Library for PSPICE (Orcad)
for TDK Electronics AG : VHF.lib
Version 1.00
assembled on (Tue Jan 14 08:48:50 CET 2020)
This SPICE library contains all models for
VHF-chokes
High resonant frequency
Central axial leads
These linear models are suited for DC, AC and Transient-
simulations. Accurate results can be expected below
the first resonant frequency. Using these models
outside its specification can lead to false results.
The models describe the behaviour of typical
elements. Please keep in mind, that real components
can vary in the range given in the datasheets.
Library listing of all parts
(sorted by part numbers) :
B82111E0000C021 Leaded Inductors (VHF) - High resonant frequency
B82111E0000C022 Leaded Inductors (VHF) - High resonant frequency
B82111E0000C023 Leaded Inductors (VHF) - High resonant frequency
B82111E0000C024 Leaded Inductors (VHF) - High resonant frequency
B82111E0000C025 Leaded Inductors (VHF) - High resonant frequency
B82111E0000C026 Leaded Inductors (VHF) - High resonant frequency
B82111E0000C027 Leaded Inductors (VHF) - High resonant frequency
B82111E0000C028 Leaded Inductors (VHF) - High resonant frequency
Installation of VHF Model Library
===============================================================
The model library of VHF (VHF-chokes) for the
circuit design program PSpice Schematics, version 6.1 and following
and Cadence ORCAD Capture comprises the following three files:
VHF.LIB ASCII data file:
This file respresents the actual library and
contains the data required for simulation.
VHF.SLB Symbol data file:
This file contains the terminal/graphics information
required by the graphic user interface "Schematics"
VHF.OLB Symbol data file:
This file contains the terminal/graphics information
required by the graphic user interface "Orcad Capture"
To install the library you must copy the a.m. files into
a ORCAD working directory (e.g. \LIB or \UserLib)
PSpice Schematics:
The library files must then be activated under PSpice.
Proceed as follows to install the VHF library:
1. Start PSpice
Install library file VHF.LIB as permanent library
("ADD LIBRARY*") in submenu (version 9.1)
ANALYSIS -> LIBRARY AND INCLUDE FILES ...
BROWSE.. (choose VHF.LIB)
.. ADD*
.. OK
ATTENTION: Add without asterisk ("*") is a local include
only for this actual simulation task.
2. Install symbol data file VHF.SLB for the
"Schematics" graphic interface in submenu
OPTIONS -> EDITOR CONFIGURATION -> LIBRARY SETTINGS
BROWSE.. (choose VHF.LIB) .. ADD* .. OK
Cadence ORCAD Capture:
The library files have to be included in ORCAD Capture
Proceed as follows to install the VHF library:
1a. Use the delivered precompiled VHF.OLB
or
1b. Start Cadence ORCAD Capture
Translate the library files VHF.SLB
as ORCAD library (VHF.OLB):
FILE -> Import Design -> PSpice -> Open ...
BROWSE.. (choose VHF.SLB)
.. OK (version 10.5)
2. Adding the components to your project:
Open your project -> open a schematic
PLACE -> PART... -> Add Library...
(choose VHF.OLB)
place component with OK.
3. Install the library VHF.LIB for simulation:
PSPICE -> Edit Simulation Profile -> Configuration
Files -> Category Library
BROWSE.. (choose VHF.LIB)
ADD as Global/to Design
OK