B32320I* Round case,ANSYS
History
History for SPICE-Library for ANSYS Designer
for TDK Electronics AG : TDK_B32320I.lib
Version 1.00
assembled on (Wed Dec 15 13:57:02 CET 2021)
-----------------------------------------------------------------------
Version 1.00
- library created
- B32354S series added (7 Components)
-----------------------------------------------------------------------
Readme
SPICE-Library for ANSYS Designer
for TDK Electronics AG : TDK_B32320I.lib
Version 1.00
assembled on (Wed Dec 15 13:57:02 CET 2021)
This SPICE library contains all models for
Film Capacitors for DC Link / Round case series
These linear models are suited for DC, AC and Transient-
simulations. Accurate results can be expected below
the first resonant frequency. Using these models
outside its specification can lead to false results.
The models describe the behaviour of typical
elements. Please keep in mind, that real components
can vary in the range given in the datasheets.
Library listing of all parts
(sorted by part numbers) :
B32320I0107K Film Capacitor for DC Link / Round case series (100 uF +-10%)
B32320I0157K Film Capacitor for DC Link / Round case series (150 uF +-10%)
B32320I0306K Film Capacitor for DC Link / Round case series (30 uF +-10%)
B32320I0706K Film Capacitor for DC Link / Round case series (70 uF +-10%)
B32320I0955K Film Capacitor for DC Link / Round case series (9.5 uF +-10%)
B32320I1107K Film Capacitor for DC Link / Round case series (100 uF +-10%)
B32320I1216K Film Capacitor for DC Link / Round case series (21 uF +-10%)
B32320I1506K Film Capacitor for DC Link / Round case series (50 uF +-10%)
B32320I1655K Film Capacitor for DC Link / Round case series (6.5 uF +-10%)
B32320I1666K Film Capacitor for DC Link / Round case series (66 uF +-10%)
B32320I4206K Film Capacitor for DC Link / Round case series (20 uF +-10%)
B32320I4207K Film Capacitor for DC Link / Round case series (200 uF +-10%)
B32320I4267K Film Capacitor for DC Link / Round case series (260 uF +-10%)
B32320I4276K Film Capacitor for DC Link / Round case series (27 uF +-10%)
B32320I4886K Film Capacitor for DC Link / Round case series (88 uF +-10%)
B32320I8117K Film Capacitor for DC Link / Round case series (110 uF +-10%)
B32320I8156K Film Capacitor for DC Link / Round case series (15 uF +-10%)
B32320I8157K Film Capacitor for DC Link / Round case series (150 uF +-10%)
B32320I8207K Film Capacitor for DC Link / Round case series (200 uF +-10%)
B32320I8506K Film Capacitor for DC Link / Round case series (50 uF +-10%)
Installation of TDK_B32320I Model Library
===============================================================
The model library of TDK_B32320I (Film Capacitors for DC Link / Round case series) for the
circuit design program ANSYS Electronics Desktop Circuit
Simulator comprises the following 5 files:
TDK_B32320I.lib ASCII data file:
This file respresents the actual library and
contains the data required for simulation.
TDK_B32320I_Nexxim.inc
ASCII data file:
This file respresents the actual library and
contains the data required for simulation with
Nexxim.
TDK_B32320I.aclb Components file:
This file represents the terminal information
and data about the single Components of the
library
TDK_B32320I.aflb Footprint data file:
This file contains the exact footprint for the
elements in the library
TDK_B32320I.aslb Symbol data file:
This file contains the graphics information
required by the graphic user interface
To install the library you must extract the a.m. files into
the /userlib directory of your ANSYS Electronics Desktop
Installation. (They will be then situated in
/userlib/TDK/TDK_B32320I. Don't use another directory!)
ANSYS Electronics Desktop:
1) Copy or extract the files in the a.m. directory
2) Start ANSYS Electronics Desktop
3a) Project -> Insert Circuit Design
4) Tools -> Configure Libraries
5) Mark: User Libraries
Components
Available Libraries: TDK-Folder
>>
6) Repeat for Footprints und Symbols
7) Check "Save as Default" and confirm with "OK"
8) The Elements are now prepared for use. Your find them in
the "Project Manager" -> "Components" -> "User Libraries"
Nexxim:
Tools -> Options -> General Options -> Component Chooser
Options -> check "Show all Components"
3b) Project -> Insert Nexxim Circuit Design
4) Tools -> Configure Libraries
5) Mark: User Libraries
Components
Available Libraries: TDK-Folder
>>
6) Repeat for Footprints und Symbols
7) Check "Save as Default" and confirm with "OK"
8) The Elements are now prepared for use. Your find them in
the "Project Manager" -> "Components" -> "User Libraries"