TDK Corporation presents two new series of EPCOS MMKP capacitors, which employ a film that is metallized on both sides. The new capacitors offer particularly high pulse strength as well as a high current capability.
X2 capacitors are used not only for EMI suppression. Thanks to their robustness and resistance to humidity and high temperatures, they are also suitable for voltage dividers in capacitive power supplies – for example, those of smart meters that are mounted outside buildings.
The new EPCOS N59 ferrite material is particularly suitable for power supplies and inverters whose design is based on GaN semiconductors with very high switching frequencies. Optimum power is reached at frequency of 2 MHz.
TDK Corporation presents the new high-surge series of EPCOS multilayer varistors. These are characterized by their high surge current capability, ranging from one surge of up to 5000 A to ten surges of up to 3500 A, with a pulse of 8/20 µs and an operating voltage of up to 65 V DC.
TDK Corporation announces the introduction of high temperature resistant MLCCs with soft terminations, expanding the CGA series of MLCCs for automotive applications. These components employ electrodes made of conductive resins that provide effective protection against solder cracks caused by thermal cycling, flex cracks caused by stress to the PCB, and damage due to vibrations and shocks.
TDK Corporation has expanded its CLF-NI-D series of rugged power inductors for use in automotive electronics. The new CLF7045NI-D wirewound SMD power inductors feature high efficiency and reliability over a very wide temperature range ...
TDK Corporation has expanded its portfolio of multilayer power inductors with the new MLJ1608 high-performance series. Complementing the existing MLF1608 series of multilayer power inductors for signal lines, the MLJ1608 series was designed for use in near field communication (NFC) and power line applications especially in smartphones, tablets and NFC modules.
TDK Corporation has expanded its lineup of common-mode filters. The new TCM0403R thin-film common-mode filter offers a common-mode attenuation of 27.5 dB at 850 MHz in an IEC 0403 package, the world’s highest value for this case size.
TDK Corporation has expanded its CCT series of clamp AC current sensors with two new types that are rated for 300 A and 80 A. The new sensors are designed for use in the power distribution panels in a variety of energy management systems. With a current transformation ratio of 3000:1 the 300-A and 80-A types offer maximum output currents of 100 mA and 26.6 mA, respectively.
TDK Corporation presents a new series of EPCOS X1 capacitors designed for an extended operating voltage of up to 530 V AC. The new capacitors are ideally suited for EMI suppression in X1 circuits (L-N).
TDK Corporation presents a new series of EPCOS metallized polypropylene (MFP) film capacitors with high pulse strength and current capability.
TDK Corporation has expanded its NTCG04 lineup of IEC 0402 case size (EIA 01005) SMD NTC thermistors with a new type featuring a nominal resistance of 10 kΩ and a narrow tolerance of just ±1 percent.
TDK Corporation presents the new EPCOS TSM-LC-N690 thyristor module for power factor correction (PFC) with an expanded operating voltage range up to 690 V AC. The module performs two-phase switching of the capacitors, so that a neutral conductor is not needed.
TDK Corporation presents a new series of very compact EPCOS 3-line EMC filters for frequency converters. These high-performance filters are suitable for a rated voltage of 530 V AC in 50/60 Hz grids.
TDK Corporation presents new EPCOS PTC heating elements for electric vehicles. In contrast to the tried and test heating elements for conventional 12 V onboard power supplies, the new components are designed for the considerably higher voltage batteries in electric vehicles.
TDK Corporation presents two new series of leaded MLCCs, which are halogen-free according to IEC 61249-2-21 and expand the company’s lineup of products that offer minimal impact to the environment over the entire life cycle.
TDK Corporation presents a new multilayer low-pass filter for LTE and other next-generation high-speed wireless communication systems. The new filter with ordering code DEA071910LT-4003B1 achieves a miniaturized footprint of 0.65 mm x 0.5 mm and an insertion height of just 0.3 mm.
TDK Corporation has developed a new series of rugged power inductors for use in automotive electronics. The CLF6045NI-D wirewound SMD power inductors feature high efficiency and reliability over a wide temperature range from -55 °C to +150 °C and offer rated inductance values from 1.0 μH to 470 μH (E6 series).
Available space inside smartphones continues to shrink as they add more functions and serve more frequency bands. TDK has expanded its diplexer portfolio with the miniature DPX 1005 multilayer diplexer for WLAN and Bluetooth at 2.4 GHz and 5.0 GHz, which features power-saving low insertion losses with the smallest case size.
TDK Corporation presents a new generation of the CeraLink™, a highly compact solution for the snubber and DC links of fast-switching converters based on SiC and GaN semiconductors.